Unfortunately, we currently do not have a manual for this product in combination with this application. If available, you can also follow the instructions in the manufacturer's manual. If you have any questions, please contact durgol.
General manual durgol swiss steamer
NOTE: The oven must have cooled down completely before descaling. Under no circumstances should the descaling liquid be allowed to evaporate.
Device WITH descaling program
- Place a portion of durgol swiss steamer in the water reservoir (dosage according to the steamer manufacturer's instructions*).
- If necessary, dilute with tap water - up to the amount specified in the device instructions for use. Start descaling program.
- For appliances without a permanent water connection, the descaling liquid is
pumped back into the water tank after the program has ended. This must not be used further (caution: hot! Allow to cool before draining the liquid). - After descaling, rinse the reservoir with lukewarm tap water. Then rinse the device with tap water according to the descaling program.
Device WITHOUT descaling program
- Fill the water reservoir on the bottom of the device with durgol swiss steamer so that the entire bottom is well covered. Spread the liquid over the limescale deposits around the reservoir with a sponge. Only use the durgol swiss steamer cold, without activating a program.
- Allow the product to work.
- Remove the liquid with a sponge.
- Clean thoroughly with tap water and wipe dry.
Your device is now ready for use again.
Additional information send an email to: info@durgol.nl or call +31 481 452277 or free 00800 84 85 86 87.
